International Journal of Engineering and Innovative Research

Yazarlar: Cyril ALİYEGBENOMA, Mercy OZAKPOLOR

Konular:Mühendislik

Anahtar Kelimeler:Central composite design,Composite,Mahogany,Modeling,Polypropylene,Sawdust,Tensile strength

Özet: This study focuses on the optimisation of the injection moulded Polypropylene -Sawdust (PP-sawdust) composite. The PP material and sawdust were mixed together to form a homogenous mixture with various percentage composition by volume as recommended by the design of experiments using the central composite design (CCD). The two screw plunger injection moulding machine was used to produce Polypropylene-Sawdust (PP-Sawdust) composite at various temperature. The produced composites were evaluated for their mechanical properties which included tensile strength, proof stress, percentage elongation and flexural strength. The response surface methodology (RSM) and artificial neural networks (ANN) were used to determine the effect of the interaction of temperature, material type and percentage by volume of material on the mechanical properties of the produced PP-sawdust composite. The models were validated using coefficient of determination (R2). The models were validated using coefficient of determination (R2). The coefficient of determination (R2) obtained ranged from 0.9435 (94.357%) to 0.9988 (99.88%) which indicates that a substantial good fit was achieved by the model developed. A desirability of 0.952 was obtained which shows the adequacy of the model terms The optimization results for PP-Sawdust composites shows that the tensile strength, proof stress, flexural strength and flexural modulus were maximized with values of 31.90 MPa, 41.94 MPa, 88.22 MPa and 2.72 GPa respectively obtained at barrel temperature of 224.65 oC and polymer level of 45.56% while percentage elongation and average deflection were minimized with values of 74.12% and 6.46 cm respectively

---